Battery Connector Harness Assembly Go Go Elite Traveller
Product description
Battery Connector Harness Assembly Go Go Elite Traveller
This item fits Pride Elite Traveller , Traveller Plus
Fits on the Chassis to connect with contacts on base of battery box.
Fitted with a 3 amp blade fuse
Fiitting Guidance
Front chassis cover needs all screws removed holding it to chassis and then carefully lift and rotate so silver colour main controller can be seen.
Remove 4 small Torx head screws holding cable cover to controller.
Remove 2 bolts holding plastic connector assembly to chassis (Nuts on underside).
Make note of cable position of black and red battery connector wires in controller and gently remove.
Remove also small plug from controller with blue wire and diagnostic connector.
Also remove two wires to fuse on battery connector.
Remove whole assembly and refit new item in reverse order.
Ensure when refitting controller cover that no wires are pinched and cover sits on seals around periphery