LED Power Gauge / Volt Meter for Go Go Elite Traveller / Colt Revo 2 Mobility Scooter
LED Power Gauge / Volt Meter for Go Elite Traveller / Pride Colt / Revo 2
This item is the NT Ambient Volt Meter fitted to some models of
Revo 2, Colt Series, Colt Executive, Colt Sport, Apex Finesse, Apex Rapid, Finesse LX, Finesse Sport, Go Go Ultra X,Go Sport, Elite Traveller, Elite Traveller Plus, GoGo LX Jazzy ZT8Celebrity X , Celebrity DX,
Please note it cannot be fitted in place of LED voltmeter with round LEDs as controller programming is different.
Please check carefully as power indication could be erratic / unreliable if wrong type of voltmeter is fitted.
Visual identity for this type of voltmeter -
The printed circuit board (PCB) is green. When fully illuminated, the voltmeter has (2) two red LEDs, (3) three yellow LEDs, and (5) five green LEDs as shown in the image.
How to visually verify the controller programming and voltmeter are compatible:
If the program is correct, the voltmeter sweeps from left to right, illuminating all LEDs as a start-up sequence, then displays the battery voltage.
Blue power LED remains on during normal operating conditions.
Blue power LED flashes the beep code when there is a controller fault.
If the controller program is incorrect, the blue power LED will continuously blink at random.
The battery gauge indicator is the mobility scooters power or fuel gauge. it displays the remaining available power left before recharging, This is sometime referred to as voltmeter or Volt Meter and is normally an easy part to replace